F3S-TGR-S_A/-S_D

Bağımsız kontaksız kapı switch’i

Bağımsız kontaksız switch’ler, güvenlik kapıları veya makinelerde konum izleme gibi uygulamaları destekler.Mekanik toleransları ve vibrasyonları korumak için kanıtlanmış Omron kontaksız teknolojisini kullanır.

Tek veya çift aktüatörlü modeller mevcuttur
Hall teknolojisi tabanlı
En fazla 20 switch seri olarak bağlanır
Kolay tanı için LED
Paslanmaz çelik uyumluların arkasında çalışır
Kontaksız – aşınmasız– partikülsüz
Mekanik toleransların dengelenmesi
IP69K (kablolu tipler) sebebiyle yüksek basınçla temizleme ve CIP ile SIP prosesleri için uygundur
EN ISO 13849-1’e göre PLe’ye kadar olan emniyet kategorileriyle uyumludur

İLETİŞİM

Telefon : 0 (232) 449 21 00 | E-posta : satis@hatelgas.com.tr

Description

Özellikler ve sipariş bilgisi

Ordering information

Switches

Polyester housing

Type	Cable connection	Order code
Single actuator sensing	5 m pre-wired	F3S-TGR-SPSA-05
	10 m pre-wired	F3S-TGR-SPSA-10
	M12, 8-pin	F3S-TGR-SPSA-M1J8
Dual actuator sensing	5 m pre-wired	F3S-TGR-SPSD-05
	10 m pre-wired	F3S-TGR-SPSD-10
	M12, 8-pin	F3S-TGR-SPSD-M1J8

Stainless steel housing

Type	Cable connection	Order code
Single actuator sensing	5 m pre-wired	F3S-TGR-SMSA-05
	10 m pre-wired	F3S-TGR-SMSA-10
	M12, 8-pin	F3S-TGR-SMSA-M1J8
Dual actuator sensing	5 m pre-wired	F3S-TGR-SMSD-05
	10 m pre-wired	F3S-TGR-SMSD-10
	M12, 8-pin	F3S-TGR-SMSD-M1J8

Accessories

		Order code
Cables 8-pin	2 m	Y92E-M12PURSH8S2M-L
	5 m	Y92E-M12PURSH8S5M-L
	10 m	Y92E-M12PURSH8S10M-L
	25 m	Y92E-M12PURSH8S25M-L
Actuators (only for master coded types)	for F3S-TGR-SPSA and -SPSD	F39-TGR-SPS-A
Actuators (only for master coded types)	for F3S-TGR-SMSA and -SMSD	F39-TGR-SMS-A
Mounting screws	Set of Torx safety screws (M4, 4 × 30 mm, 4 × 20 mm, 4 × 10 mm; incl. washers and Torx bit)	F39-TGR-N-SCREWS

Specifications

Mechanical data

Item	Model	Polyester Sensor	Stainless steel sensor
Indicator	–	Green LED: Indication of safety circuits closed (Guard closed, actuator present, feedback circuit checked)
Indicator	–	Yellow LED: Indication of safety circuits open (Actuator removed)
Operating distance	OFF  ON (Sao)	10 mm Close
Operating distance	ON  OFF (Sar)	15 mm Open
Actuator approach speed	Min.	4 mm/s
Actuator approach speed	Max.	1,000 mm/s
Operating temperature		-25 to 45°C
Enclosure protection	Flying lead	IP69K
Enclosure protection	M12 connector	IP67
Material cable	Flying lead	PVC, Ø 6 mm o.d.
Material cable	M12 connector	250 mm, PVC, Ø 6 mm o.d.
Material housing		UL approved Polyester	Stainless steel 316

Electrical data

Item		Model	Polyester sensor
Sensing technology		–	Hall
Serial connection		–	up to 20 switches
Power supply			24 VDC±10%
Power consumption		Max.	0.1 A
Switching current		Min.	10 mA, 5 VDC
Rated loads	Safety outputs	Max.	3 A, 250 VAC/3A, 24 VDC
Rated loads	Auxiliary output	Max.	0.2 A, 24 VDC

Approved standards

EN standards certified by TÜV Rheinland
EN ISO13849-1
EN 62061
EN ISO 14119
EN 60204-1
EN/IEC 60947-5-3
UL 508, CSA C22.2
BS 5304
EN 1088-1 conformance

Wiring example (serial connection with manual restart)

(up to PLe acc. EN ISO 13849-1)

Safety Circuit 1 (Black/White) utilises internally checked force guided relay contacts and is connected in series with the corresponding Safety Circuit 2 (Yellow/Green) of the next switch. Allows minimal wiring and higher current switching to K1 and K2 contactors.

A manual start and contactor feedback check is achieved by connecting K1(Aux) and K2(Aux) feedback contacts and momentary start button through the orange and brown feedback check.