F3S-TGR-N_M/-N_U

RFID kontaksız kapı switch’i

RFID Kontaksız kapı switch’leri, menteşeyi, kayan veya çıkan güvenlik kapılarını izlemek üzere tasarlanmıştır.

RFID teknoloji (kod) ve hall teknoloji (uzaktan kontrol) tabanlı
RFID tasarım, oldukça aldatılmaya karşı yüksek korumalı iki çalışma modeli içerir:
- M-tipleri (Master kodlu): Geleneksel switch’ler gibi herhangi bir aktüatörle her sensör çalışır
- U-tipleri (Benzersiz kodlu): Her sensör ve aktüatör benzersiz bir kod kullanır. Daha aldatılmaya karşı yüksek koruma gerektiren uygulamalar için bir çözümdür
En fazla 20 switch seri olarak bağlanır
LED kolay tanı koymayı destekler
Mekanik toleransların dengelenmesi
Kontaksız – aşınmasız – partikülsüz
Tüm OMRON emniyet kontrolörleriyle çalışır
IP69K sebebiyle CIP/SIP prosesleri ve yüksek basınçla temizleme için uygundur (kablolu tipler)
EN ISO 13849-1’e göre PLe’ye kadar olan emniyet kategorileriyle uyumludur

İLETİŞİM

Telefon : 0 (232) 449 21 00 | E-posta : satis@hatelgas.com.tr

Description

Özellikler ve sipariş bilgisi

Ordering information

Master coded: Any actuator will operate with any sensor (Power down – power up re-teach needed if exchange of actuator)
Unique coded: Only one actuator fits to the code of the sensor

Elongated sensors

Type	Cable connection	Contact configuration	Order code
Type	Cable connection	Contact configuration	Master coded	Unique coded
	5 m pre-wired	2NC/1NO	F3S-TGR-NLPM-21-05	F3S-TGR-NLPU-21-05
	10 m pre-wired		F3S-TGR-NLPM-21-10	F3S-TGR-NLPU-21-10
	M12, 8-pin		F3S-TGR-NLPM-21-M1J8	F3S-TGR-NLPU-21-M1J8

Small sensors

Type	Cable connection	Contact configuration	Order code
Type	Cable connection	Contact configuration	Master coded	Unique coded
	5 m pre-wired	2NC/1NO	F3S-TGR-NSPM-21-05	F3S-TGR-NSPU-21-05
	10 m pre-wired		F3S-TGR-NSPM-21-10	F3S-TGR-NSPU-21-10
	M12, 8-pin		F3S-TGR-NSPM-21-M1J8	F3S-TGR-NSPU-21-M1J8

Specifications

Mechanical data

Item
Serial switching		up to 20 pcs.
Indicator LED		LED green – Indication of safety circuit closed
Operating distance	OFF  ON (Sao)	10 mm Close
Operating distance	ON  OFF (Sar)	20 mm Open
Actuator approach speed	Min.	4 mm/s
Actuator approach speed	Max.	1,000 mm/s
Operating temperature		-25 to 80°C
Enclosure protection	Flying lead	IP69K
Enclosure protection	M12 connector	IP67
Material cable	Flying lead	PVC, Ø 6 mm o.d.
Material cable	M12 connector	250 mm, PVC, Ø 6 mm o.d.
Material		UL approved Polyester

Electrical data

Item			F3S-TGR-N_M	F3S-TGR-N_U
Code			Master coded: Every switch same code (Power down – Power up re-teach needed, if actuator interchanged)	Unique coded: 32 x 16 6 different codes
Technology			RFID (code) and Hall (distance check)
Power supply			24 VDC±15%
Power consumption		Max.	0.2 A
Switching current		Min.	1 mA, 10 VDC
Rated loads	NC contacts	Max.	0.2 A, 24 VDC
Rated loads	NO contact	Max.	0.2 A, 24 VDC
Output type			Electronic output (potential-free optocoupler output)

Approved standards

EN standards certified by TÜV Rheinland
EN 62061
EN ISO 14119
EN ISO13849-1
EN 60204-1

EN standards certified by TÜV Rheinland
EN/IEC 60947-5-3
UL 508, CSA C22.2
BS 5304
EN 1088-1 conformance

Accessories

		Order code
Cables 8-pin	2 m	Y92E-M12PURSH8S2M-L
	5 m	Y92E-M12PURSH8S5M-L
	10 m	Y92E-M12PURSH8S10M-L
	25 m	Y92E-M12PURSH8S25M-L
T-Connector connection cable	T-Connector for M12 connector	F39-TGR-NT
	0.6 m, M12-8pin	Y92E-M12FSM12MSPURSH806M-L
	2 m, M12-8pin	Y92E-M12FSM12MSPURSH82M-L
	5 m, M12-8pin	Y92E-M12FSM12MSPURSH85M-L
	10 m, M12-8pin	Y92E-M12FSM12MSPURSH810M-L
Actuators (only for master coded types)	for F3S-TGR-NLPM	F39-TGR-NLPM-A
Actuators (only for master coded types)	for F3S-TGR-NSPM	F39-TGR-NSPM-A
Mounting screws	Set of Torx safety screws (M4, 4 × 30 mm, 4 × 20 mm, 4 × 10 mm; incl. washers and Torx bit)	F39-TGR-N-SCREWS

Wiring examples (Single head connection)

G9SA

Single sensor application with G9SA-301
(up to PLe acc. EN ISO 13849-1)